News

首页>INFO CENTER>News

Introduction of Precision Injection Molding Machine

2021-03-18

Hisson Plastic Machinery is an enterprise specializing in the production, sales and service of injection molding machines and peripheral equipment. The precision injection molding machine is a piece of equipment it produces and sells. This equipment is very popular among users. So, what are the advantages of precision injection molding machines?

Introduction of Precision Injection Molding Machine

The maintenance of vertical injection molding machine

2021-03-18

Vertical injection molding machine is one of the equipment commonly used in the plastic processing industry. When working continuously, debris should be removed regularly. For high surface quality requirements of injection molded plastic parts, surface of cavity should be treated with a skin texture to increase frequency of cleaning, to ensure that surface of cavity is bright and clean.

The maintenance of vertical injection molding machine

How much does an injection molding machine cost?

2021-03-18

How much is an injection molding machine? This is the most frequently asked question by customers. And in this era of the Internet, product prices are already very transparent. But in fact, consumers must first know what kind of machine they need before asking the price. The injection molding machine you purchase needs to be used to produce what product, what materials need to be used, whether the product line will be greatly changed in the future, what level of product precision needs to be achieved, etc.

How much does an injection molding machine cost?

Five categories of the vertical injection molding machine

2021-03-18

Injection moulding machine produced by Hisson is very popular in the market.Hisson's blow molding machine is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a product is up to customers' needs for a highly cost-effective product.

Five categories of the vertical injection molding machine

Introduction of the injection molding machine

2021-03-18

Why the injection molding machine cannot adjust the mold 1. Deviation of mechanical equipment level and coaxiality. Check with a square ruler. Adjust the coaxiality and level. 2. Burning nuts: check if the nuts can be rotated to get hot iron powder. Remove the nut. 3. Adjust the upper and lower support plates. Check the lock nut for disassembly of the support plate. Adjust the adjusting nut. 4. The injection mold adjustment valve is stuck. Remove the valve and check. Clean the valve.

Introduction of the injection molding machine

What is the working principle of injection molding machine?

2021-03-18

The working principle of the injection molding machine is similar to the syringe used for injection. It uses the thrust of the screw (or plunger) to inject the plasticized molten state (that is, viscous flow) into the closed mold cavity. The process of obtaining products after curing and shaping.

What is the working principle of injection molding machine?

How to eliminate the noise of injection molding machine?

2021-03-18

With the development of the plastics industry, the use of injection molding machines is increasing. However, the noise problem of injection molding machines has always plagued producers and users. How to eliminate the noise of injection molding machine? The following Hisson injection molding machine manufacturers will introduce to you from the following three aspects.

How to eliminate the noise of injection molding machine?

2021-03-18

With the continuous increase of injection products, the popularity of injection molding machines is just around the corner. According to Cao Jian, executive vice chairman of the China Plastics Processing Industry Association, “the injection molding process, as one of the most representative molding methods in the plastics industry, has become an important technical support for the rapid development of my country’s modern manufacturing industry”. Injection molding machines are gradually moving towards full automation, and traditional injection molding is gradually being overturned.

Structural functions, polishing and maintenance of injection molding machine

2021-03-18

Polishing and maintenance of injection molding machine 1. The effect of workpiece surface condition on polishing process During the crushing process of steel machining, the surface layer will be damaged by heat, internal stress or other factors. Improper cutting parameters will affect the polishing effect. Therefore, high-speed CNC finishing is required, and the cutting amount is controlled at 0.05mm ~ 0.07mm.

Structural functions, polishing and maintenance of injection molding machine

How to solve the leakage of injection molding machine?

2021-03-18

1. It is proposed that the molds are equipped with positioning rings. Although there is no positioning ring, it will save its cost, but there is no positioning ring, which will not only cause hidden safety risks of glue leakage, but also lengthen the time of changing the mold when changing the mold. The cost of destroying the electric heating ring can save the expenditure of the positioning ring;

How to solve the leakage of injection molding machine?

What are the characteristics of vertical injection molding machine, horizontal injection molding machine and angle injection molding machine?

2021-03-18

Vertical injection molding machine 1. The injection device and the mold clamping device are on the same vertical center line, and the mold is opened and closed in the up and down direction. Its floor space is only about half of that of horizontal machines, so it is about twice as productive in terms of floor space.

What are the characteristics of vertical injection molding machine, horizontal injection molding machine and angle injection molding machine?

What are the hazards of high temperature rise of injection molding machines?

2021-03-18

The moving parts with different coefficients of thermal expansion in the hydraulic components get stuck due to the narrowing of the cooperation clearance, causing malfunctions, affecting the transmission accuracy of the hydraulic system, and resulting in poor working quality of the components.

What are the hazards of high temperature rise of injection molding machines?

What are the lubrication requirements for semi-automatic injection molding machines?

2021-03-18

The lubrication of the injection molding machine can be carried out according to the general rules of lubrication of mechanical equipment, hydraulic machinery and electric heating equipment according to the movement method, but some components (such as injection components and transmissions) need to be fully considered and mixed lubrication methods are selected.

What are the lubrication requirements for semi-automatic injection molding machines?

The characteristics of injection molding machines and how to deal with excessive temperature rise of injection molding machine?

2021-03-18

(1) According to different load requirements, frequently check and adjust the pressure of the relief valve to make it just right. (2) Reasonable selection of hydraulic oil, especially the viscosity of the oil. When conditions permit, try to use a lower viscosity to reduce viscosity friction loss.

The characteristics of injection molding machines and how to deal with excessive temperature rise of injection molding machine?

What should notice for purchasing an injection molding machine?

2021-03-18

1. Purchase the technical parameters of the injection molding machine. When users choose injection molding machines, they can be judged by vertical or horizontal comparison. The so-called "longitudinal" means that the main technical parameters of the injection molding machine should meet industry standards and be reviewed according to industry standards. The so-called "horizontal" is to compare the

What should notice for purchasing an injection molding machine?

Email: sales@hisson.com

Homepage: www.hisson.com

Sales Office:

Room 705, No.2-6, Green Life Square, Simingzhong Road, Yinzhou,Ningbo,315100, China

Production Plant:

Louai village Industrial zone, Chunhu town, Ningbo, China.

Sales: Mobile/What's APP/Wechat: +86-1385-8277-834

Project: Mobile/What's APP/Wechat: +86-1380-6667-497

Hisson Plastic Machinery Co., Ltd.

Sales Office:

Call Us

+86 574 87170279

Chat Online 编辑模式下无法使用

Chat Online inputting...

Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.

*Name：

*Phone：

*E-mail：

*Content：